QAE150 page 1 of 4 www.pduke.com 2013/04/08 QAE150 series quarter-brick dc-dc converter 2:1 ultra wide input range up to 150watts features applications ? no minimum load required ? low standby power consumption ? soft-start ? 2250vdc input to output basic insulation ? safety meets ul60950-1, en60950-1 and iec60950-1 ? ce mark meets 2006/95/ec, 2011/95/ec and 2004/108/e c ? compliant to rohs eu directive 2011/65/eu ? wireless network ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment 2250vdc isolation remote control uvp ocp scp ovp otp low standby power technical specification all specifications are typical at nominal input, ful l load and 25 otherwise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc a ma % f QAE150-12s3p3 8.5 ~ 22 3.3 30 50 89 91000 QAE150-12s05 8.5 ~ 22 5 24 50 90 48000 QAE150-12s12 8.5 ~ 22 12 10 50 91 8300 QAE150-12s15 8.5 ~ 22 15 8 50 91 5300 QAE150-12s24 8.5 ~ 22 24 5 50 90 2100 QAE150-12s30 8.5 ~ 22 30 4 50 90 1300 QAE150-12s48 8.5 ~ 22 48 2.5 50 89 520 QAE150-24s3p3 16.5 ~ 36 3.3 30 25 89 91000 QAE150-24s05 16.5 ~ 36 5 24 25 90 48000 QAE150-24s12 16.5 ~ 36 12 10 25 91 8300 QAE150-24s15 16.5 ~ 36 15 8 25 91 5300 QAE150-24s24 16.5 ~ 36 24 5 25 91 2100 QAE150-24s30 16.5 ~ 36 30 4 25 91 1300 QAE150-24s48 16.5 ~ 36 48 2.5 25 89 520 QAE150-48s3p3 33 ~ 75 3.3 30 15 89 91000 QAE150-48s05 33 ~ 75 5 25 15 91 50000 QAE150-48s12 33 ~ 75 12 12 15 90 10000 QAE150-48s15 33 ~ 75 15 10 15 90 6670 QAE150-48s24 33 ~ 75 24 6 15 92 2500 QAE150-48s30 33 ~ 75 30 5 15 91 1670 QAE150-48s48 33 ~ 75 48 3 15 92 630 part number structure QAE150 - 48 s 05 - p hs series name input output output ctrl and heat-sink voltage quantity voltage pin options and mounting hole tread options (vdc) (vdc) 12: 8.5~22 s: single 3p3: 3.3 : negative logic : nc 24: 16.5~36 05: 5 p: positive logic hs: h=0.24? horizontal, 7g-0029a-f 48: 33~75 12: 12 hs1: h=0.5? horizontal, 7g-0030a-f 15: 15 hs2: h=0.24? vertical, 7g-0031a-f 24: 24 hs3: h=0.5? vertical, 7g-0032a-f 30: 30 th: through hole (no thread) (1) 48: 48 (1) the module can?t equip heat-sink with th option .
QAE150 page 2 of 4 www.pduke.com 2013/04/08 input specifications parameter conditions min. typ. max. unit operating input voltage range 12vin(nom) 24vin(nom) 48vin(nom) 8.5 16.5 33 12 24 48 22 36 75 vdc start-up voltage 12vin(nom) 24vin(nom) 48vin(nom) 9 18 36 vdc shutdown voltage 12vin(nom) 24vin(nom) 48vin(nom) 7.3 15.5 31.6 8.1 16.3 32.5 vdc start up time constant resistive load power up remote on/off 75 75 100 100 ms input surge voltage 1 second, max. 12vin(nom) 24vin(nom) 48vin(nom) 30 50 100 vdc input filter (1) pi type negative logic (standard) dc-dc on dc-dc off short or 0 ~ 1.2 vdc open or 3 ~ 12 vdc referenced to ?input pin positive logic (option) dc-dc on dc-dc off open or 3 ~ 12 vdc short or 0 ~ 1.2 vdc remote on/off input current of ctrl pin -0.5 1 ma remote off input current 3 ma output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.1 +0.1 % load regulation no load to full load 3.3 & 5vout others -0.2 -0.1 +0.2 +0.1 % voltage adjustability maximum output deviation is i nclusive of remote sense -20 +10 % remote sense % of vout(nom). if remote sense is not being used, sense pins should connect to the output pins with the same polarity. 10 % ripple and noise measured by 20mhz bandwidth with a 22 f/25v x7r mlcc with a 22 f/25v x7r mlcc with a 4.7 f/50v x7r mlcc with a 2.2 f/100v x7r mlcc 3.3vout, 5vout 12vout, 15vout 24vout, 30vout 48vout 75 100 200 300 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 250 s over voltage protection % of vout(nom); hiccup mode 115 130 % over load protection % of iout rated; hiccup mode 110 140 % short circuit protection continuous, automatics recovery general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute (basic insulation) input to output input (output) to base-plate 2250 2250 vdc isolation resistance 500vdc 1 g isolation capacitance 1500 pf switching frequency 270 300 330 khz design meet safety standard iec60950-1, ul60950-1, en60950-1 case material aluminum base-plate with plastic case potting material silicon (ul94-v0) dimensions 2.28 x 1.45 x 0.50 inch (57.936.812.7 mm) weight 64g (2.26oz) mtbf bellcore tr-nwt-000332 case 1: 50% stress, ta= 40 . mil-hdbk-217f ta=25 , full load (g/b, controlled environment) 9.742 x 10 5 hrs 8.573 x 10 4 hrs
QAE150 page 3 of 4 www.pduke.com 2013/04/08 environmental specifications parameter conditions min. typ. max. unit operating base-plate temperature -40 +100 over temperature protection +110 storage temperature range -55 +125 thermal impedance (2) vertical direction by natural convection (20lfm) without heat-sink mount on 2u iron base-plate with 0.24" height heat-sink with 0.5" height heat-sink 9 2.8 7.1 5.5 /w thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc specifications parameter conditions level emi (3) en55022 class b esd en61000-4-2 air 8kv contact 6kv perf. criteria a radiated immunity en61000-4-3 20 v/m perf. criteria a fast transient (4) en61000-4-4 2kv perf. criteria a surge (4) en61000-4-5 en55024:2kv perf. criteria a conducted immunity en61000-4-6 10 vr.m.s perf. criteria a note: 1. input source impedance: the power modules will oper ate as specifications without external components, assuming that the source voltage has a very low impedance and reasonable input voltage reg ulation. highly inductive source impedances can aff ect the stability of the power module. since real-world voltage source has finite impedanc e, performance can be improved by adding external f ilter capacitor. recommended nippon chemi-con ky series, 100 f/100v. 2. the heat-sink is optional and p/n: 7g-0029a-f , 7g- 0030a-f , 7g-0031a-f , 7g-0032a-f. please refer to heat-sink selection guide. 3. the QAE150 series standard module meets emi class a or class b only with external components. for more detail information, please contact with p-duke. 4. an external input filter capacitor is required if t he module has to meet en61000-4-4, en61000-4-5. recommended 2 pcs of aluminum electrolytic capacito r (nippon chemi-con ky series, 220 f/100v) to connect in parallel. 5. base-plate grounding: when connect two screw bolts to shield plane, the emi could be reduced. caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve QAE150-48s05 derating curve QAE150-48s05 derating curve with 0.24? height heat-sink QAE150-48s05 derating curve with 0.5? height heat-sink QAE150-48s05 efficiency vs input voltage QAE150-48s 05 efficiency vs output load
QAE150 page 4 of 4 www.pduke.com 2013/04/08 mechanical drawing 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1) pin connection pin define diameter 1 - input 0.04 inch 2 ctrl 0.04 inch 3 + input 0.04 inch 4 - output 0.06 inch 5 - sense 0.04 inch 6 trim 0.04 inch 7 + sense 0.04 inch 8 + output 0.06 inch external output trimming output can be externally trimmed by using the method shown below. heat-sink type options vertical fin orientation, suffix:-hs2, -hs3 horizon tal fin orientation, suffix:-hs, -hs1 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) k 22. 10 % ? 511 r d ?? ? ?? ? ? = ( ) ( ) k % ? % ? 22. 10 511 % ? 225 .1 % ? 100 v 11.5 r out u ?? ? ?? ? + ? + =
|
